MEP BIM CASE STUDIES

case-study1

Imperial Avenue by Shapoorji group – The Proposed Residential Development is comprised of 40 storey tower. Our scope of work in the project was 3D, 4D, 5D and 6D stages. BIM Modeling was accomplished using Revit whereas.. View case study

case-study2

CCU Science Building – This building is situated in SC, USA. Our scope was modeling and coordination of MEP services including HVAC and plumbing over the total area. Modeling of the services were accomplished using Revit. View case study

case-study5

WEST O’ahu Station Group – West O’ahu Station Group project contained a set of metro stations and out of that we did the BIM of three stations named East Kapolei, UH West O’ahu, & Ho’opili stations.
View case study

case-study3

Ft. Bliss Clinics – This hospital is a $1 billion medical facility situated in Texas, USA. Advenser delivered MEP models using AutoCAD MEP along with co-ordination and clash detection, which were carried out using Navisworks. View case study

case-study4

Honda-Toyota Showroom – The Honda-Toyota facility project in Seattle covering an area of 480,000 sq. feet required Advenser to model, coordinate and use this model for all other future showrooms.
View case study

case-study6

Google Kirkland – The Google campus, located in Washington, is a 2-storey office building. Our scope was to create an intelligent BIM with LOD 400 of HVAC and plumbing services from the 3D scanned point cloud data of the building. View case study